Blog

Home Blog Blog What should we do if the Roctech CNC lubrication system alarms

What should we do if the Roctech CNC lubrication system alarms

Blog / By CNC router / Mar 13 , 2023 04:47:50
What should we do if the Roctech CNC lubrication system alarms
The lubrication system can guarantee the normal operation of the CNC machining centre, which is an important part of the CNC equipment. A good lubrication system can improve the machining accuracy of the machine and extend the life of the CNC equipment. What should we do if the lubrication system alarm occurs when we are using the CNC machine to process workpieces?

     First, we can manually check whether the pressure can reach the demand value. If the pressure gauge shows that the pressure is too low, it is usually because the oil pipe is leaking or the oil pump filter is too dirty to cause a poor over oil. At this point we can check the external filter. It should also be noted that oil mixing or low temperature lubrication system will also alarm.

     The second possibility for the lubrication system alarm is that the parameters are not set properly. If we set the oiling interval too long, the oil pressure can not rise to a sufficient value, the lubrication system will also alarm. In this case we can shorten the oiling interval and extend the time to detect the oil pressure (usually 500ms shorter than the oiling time), the alarm problem will be solved.

     Therefore, we need to check the lubrication system and the status of the pressure gauge in time, often clean the lubrication system strainer, replace the lubricant and unclog the oil circuit.

    In addition, when using CNC equipment, we also need to check the air system in time, clean the air filter to avoid gas pressure leakage. And the operator should check each fastening part of the transmission parts, if found bad parts operator should promptly replace the bad parts.

    Roctech CNC machines are designed and manufactured with the utmost attention to quality. Each component is carefully designed and considered. If you would like to know more about Roctech CNC machines, please contact us by phone or email. We will be happy to answer your questions and provide you with a satisfactory solution for your CNC machine.



Have Questions? Need a Quote?

Looking for more information about our CNC machines and services? Contact us today.

Contact

Top Reviews


Related Products

Recent Post

INQUIRY Inquiry WhatsAPP WhatsAPP WeChat WeChat TikTok TikTok Facebook Facebook YouTube YouTube View VR View VR
Popup Button
Leave a Message