The noise problem of industrial production and processing has always plagued people, especially for mechanical equipment such as foam engraving machines. The following content will discuss and study the noise generation and processing of foam engraving machine.
Regardless of the size of the foam engraving machine, it will inevitably produce a certain amount of noise during its work, which is mainly caused by the following aspects. One is the noise that the spindle motor of the foam engraving machine is in operation, and the other is the abnormal noise that the foam engraving machine emits during the operation or movement of each axis.
There may be many reasons for the noise of the foam engraving machine spindle. In addition to quality problems such as poor quality of the spindle motor, the abrasion caused by the long-term use of the foam engraving machine spindle will also make the noise generated more serious. Therefore, if it is determined that it is related to the spindle motor of the foam engraving machine after a special targeted inspection work, it needs to be disassembled, repaired or replaced in time, because the abnormal noise also symbolizes the corresponding quality to a certain extent. Hidden safety hazards must be taken seriously.
As for the abnormal noise corresponding to the working shaft of the foam engraving machine, generally speaking, it is because the shaft of the foam engraving machine has problems such as improper cleaning, tight connection, and wear of the ball. Carry out the corresponding cleaning and lubrication work, and replace the balls in time, which can effectively reduce the noise of the foam engraving machine.
The foam engraving machine is in normal working condition and there is a certain amount of noise, but if there is abnormal noise, it must not be ignored, and the processing in time will not affect the subsequent work process.